Hot Selling Dental Flowable Light Cure Composite Resin A1/A2/A3

Basic Info

Model NO.	111002005-7
Sku	111002005-7
Weight	4G/Piece
Color	A1, A2, A3
Transport Package	Carton for Dental Composite
Specification	A1/A2/A3, 4g/piece
Trademark	OEM
Origin	Henan, China (Mainland)
Production Capacity	10000 Pieces/Month

Product Description

Dental Nano Flowable Light Cure Composite Resin shade A1/A2/A3

Description:
1.All Class of direct restoration for anterior and posterior.
2.Indirect restoration such as Veneer,inlay and onlay.
3.Core buildups.

INSTRUCTIONS:

1.Pretreatment and color selection of caries:

Use non-normalization with a circular holding area.Oil-free prevention of paste or pumice and water slurry clear need to acid etch the surface of the tooth glaze, rinse thoroughly with water.The surface of the enamel adjacent to the cavity should also be cleaned to ensure effective corrosion.Use a color palette to select a color similar to the teeth under wet and natural light conditions.

Blow-dry treatment: dry thoroughly with oil-free air gun.

2.Pulp protection:

In order to find the deep caries close to the pulp,cotton and polyester film were used to protect the lips and teeth,and then a kind of material(polyzinc carboxylate,calcium hydroxide,etc.) which was not compatible with free acid and dentin was selected as the bottom to protect the pulp.After being cured thoroughly, the process of acid etching was started.
3.Weak acid treatment process:Dry with oil-free air gun.then dip in weak acid with a small red rub,carefully and evenly coated in the position to repair.Keep it moist for 60 seconds.

4.Washing and drying process:
Rinse thoroughly with water,then isolate lips and teeth with cotton and mylar, and dry with an oil-free air gun.

5.Binder coating process:
Dip a white wiper into the binder and apply a uniform layer of binder to the surface of the acid-treated tooth.

6.Light polymerization process:
With the help of air gun wind force, as much as possible to make uniform,and then with a halogen cold light source irradiation for 20seconds,to make the binder Curing of film.

7. Filling process of composite resin:
Take a suitable amount of the selected color composite resin and carefully fill the cavity tightly,preferably a little higher than the edge of the cavity.

8.light curing process:
After leveling and pressing,it is cured with the cold water source of tooth element.Refer to the curing time comparison table.

9.Rough grinding,complex process:
The surface of the composite resin is ground flat with the help of a high speed turbine by using an aluminum-alloy knife and a shaping needle or a gold steel grinding wheel.

10.Rough grinding and complex process:
Composite materials from the form of the brand in your green with fine grinding, so that the composite finish and tooth axial surface similar.

Packaging and shipping:
1. Mainly packed by carton or other common security package, you also can give us your special requirements about it. We will try our best to make sure the goods arrive safely.
2. Delivery: About 5 days after order confirmed.
3. Freight: The freight cost will charge according to the weight of detailed order.4. Shipment: Your goods could be shipped to you as your requirement such as by air or by sea, full way tracking for your cargos offered before the arrival of the goods. Other Dental Products for Your Choice:Company InformationBaistra Corporation was established in 1998. which is specialized in manufacturing and exporting dental equipment, we have a group of honest, kind, and hard-working people with a thrifty and responsible attitude that has won all our customers' trust .

Why Choose Baistra Company:1. Professional on dental field for 24 years with advanced facility.2. Factory price with best quality3. Accept custom order, available in thickness and package4. Offer OEM service.5. Fast service and on-time delivery6. Sample small quantity sample are available at any time.

 

Our services:

Pre-sale service:

1. 24 hours online, please feel free to contact us anytime.

2. Provide our customers best quality product.

3. High degree of expertise to solve any problems

After sale service:

1. Fast delivery with tracking number provided to make sure ou can receive your goods fast and safety.

2. Offer free warranty service.

3. Focus on every client's satisfaction. Professional team will solve any problems you may meet In the process of using.

FAQ:

1
Q:Can I have a sample order?
A:Yes, we welcome sample order to test and check quality.

2
Q:What about the lead time?
A:Sample needs 3-5 days, mass production needs 1-2 weeks depends on order quantity.

3
Q:How do you ship the goods and how long does it take to arrive?
A:We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Any questions, please send us message freely!